The Beats Solo 3 are wireless on-ear headphones distinguished for their fine-tuned acoustics, remarkable battery life, and quick-charge capability. A single full charge provides up to 40 hours of playtime. A 5-minute charge offers up to 3 hours of listening time.
Thanks to its cushioned earcups, you can fit this foldable headset all-day without compromising comfort. You can also share audio files wirelessly with compatible Beats by Dre earphones.
The best part is that it features an LED gauge with five indicator lights that display the headset’s battery and charging status. A steady red glow means the headphones have low power, while a flashing red light signifies the battery is virtually empty. The LED fuel gauge will flash white when charging and remain lit when charging is complete.
Beats Solo 3 flashing red and white might have several meanings. In most cases, it means your headphones have a charging issue. Follow this guide to learn how to fix this problem.
- Beats Solo 3 flashing red and white usually means your headphones have a charging issue. Check the charging cable to confirm if it works and replace it accordingly.
- Your Beats Solo 3 wireless headphones might not charge because of a firmware issue. Download and install the Beats app for Android to update your Beats earphones.
- If you’re having charging issues with your Beats Solo 3 wireless, resetting the headphones might solve the problem. Press the power and volume down buttons for 10 seconds to reset them.
- Beats Solo 3 flashing red and white might indicate a cut-off external power source. Disconnecting and reconnecting the charger can fix the problem.
- A deeply discharged battery can cause your Beat Solo 3 to flash red and white. Plug in the charger and allow the headphones to charge for an extended period to fix the issue.
How to Fix Beats Solo 3 Flashing Red and White?
When you plug a charger into the earphones, the LED fuel gauge should display a steady red light. If the indicator lights are interchangeable between red and white, check the headset for charging problems.
Here are a few tips on fixing your Beats Solo 3 wireless headphones:
Restart Beats Solo 3
The Beats Solo 3 wireless headphones provide up to 40 hours of playback time. However, using them for prolonged periods can cause the internal processor to act up. Your headphones require a break to prevent overheating and static buildup.
If you notice your Beats Solo 3 flashing red and white, a simple restart can help fix the problem. You only need to:
- Locate the power button.
- Press it for 10 seconds.
- Release the power button.
- The entire LED fuel gauge will flash white followed by a single red light.
- Wait for a few seconds.
- Press the power button and try to charge the headphones.
Factory Reset Beats Solo 3
Your headphones might not charge and flash red and white because of a recent custom setting. So, if a reboot doesn’t solve the problem, a factory reset might help.
A reset restores the headphones to their out-of-the-box state. It erases all custom settings or configurations. It also fixes Bluetooth, sound, and charging issues in your Beats Solo 3.
Here are the steps:
- Find the power button on the right earcup.
- Locate the volume down button on the left earcup.
- Press the power and volume down buttons simultaneously.
- Maintain this position for 10 seconds.
- Release the buttons when the LED fuel gauge flashes.
- Set up your headphones afresh.
How to Factory-Reset Beats Solo 3
Check the Charger and Charging Cable
Your Beats Solo 3 might develop charging issues because of a loose connection. Perhaps you did not plug in the charger firmly, or you are using an incompatible charger or faulty cable causing the headphones not to charge.
Confirm the charger and the charging cable are secure before trying again. You should also ensure that the charger has the correct power ratings to meet your headset’s power requirements.
Check the Power Source
You can charge your Beats Solo 3 headphones via a wall outlet or computer. However, a faulty power outlet or USB port can cause the earphones to flash red and white. The headphones won’t charge unless you fix the problem.
If charging directly from a PC, confirm that the USB port is not faulty and delivers adequate current. Conversely, inspect the wall outlet to ascertain it doesn’t have issues. You can use an alternative power source to solve the problem.
How to Properly and Safely Test a Wall Outlet
Clean the Charging Port
The earphones are prone to dirt, dust, and debris, which can clog the charging port causing issues.
Inspect the charging port for debris and gently unclog it using a sharp pin or toothpick. You can also use a blower to avoid damaging the charging port pins. If you notice bent pins, carefully straighten them using a tweezer.
Update the Firmware
Beats Solo 3 might flash the dreaded red and white lights because of outdated firmware. The headphones have an internal processor that operates using built-in software. The firmware requires frequent updates for optimal performance.
Pairing the headphones with your iPhone or iPad will save you from updating the firmware manually. After all, Apple Inc automatically pushes software updates to your Beats Solo 3. You only need to ensure your iPhone has the latest firmware version for your headphones to receive the latest updates.
For Android devices, you must download the Beats app on your device. Once installed, follow the prompts to update your headphones’ firmware.
Charge the Headphones for Prolonged Periods
If your headphones have been sitting out for a while without use, the battery might over-discharge and become flat. A deeply discharged battery can cause your Beat Solo 3 to flash red and white since the battery doesn’t have enough power on or even recharge.
Plug in the charger and allow the headphones to charge for an extended period to fix the issue.
You can leave it plugged in for one or two days to see if it makes a difference. Use an ac adapter with a high current rating to activate the battery.
Replace the Battery
Even though Beats uses rechargeable Lithium-ion batteries, they cannot survive more than 500 charge cycles without dropping their performance. This might trigger your device to flash red and white.
So, if you notice your headphone cannot hold a charge, take it to an Apple service center for battery replacement.
Replacing the Battery on Beats Solo 3
Check for Damage
The Beats Solo 3 wireless headphones are renowned for their durability and solid build. However, they are not exempt from damage. Accidental drops can damage the charging port, circuit board, wiring, and other internal components.
Inspect the headphones for visible damage that can cause them not to charge. If you’ve tried everything and nothing seems to work. Contact Apple Inc for further assistance. You’ll receive directions to the nearest service center for help.
Frequently Asked Questions
- Question: Why is my Beats Solo 3 wireless flashing red and white?
- Answer: Beats Solo 3 flashing red and white usually means your headphones have a charging issue. Your headset won’t charge if it doesn’t receive adequate current to meet its power requirements. Check the charging cable to confirm if it works and replace it accordingly. The problem might also mean the headphones have bugs or glitches. Resetting the earphones can help fix the issue.
- Question: How do I fix Beats Solo 3 flashing red and white?
- Answer: Resetting your Beats Solo 3 headphones can help clear the red and white flashing light. This step fixes Bluetooth, pairing, sound, and charging issues by erasing custom settings. You may have to pair your headphones with your devices afresh.
- Question: How do I reset my Beats Solo 3 wireless headphones?
- Answer: The Beats Solo 3 wireless headphones do not have a reset button. However, resetting the headset is straightforward. Press the power and volume down buttons simultaneously for 10 seconds. Maintain this position until the LED fuel gauge flashes. Release the buttons and wait for the Beats Solo 3 to reboot. Once reset, set up and charge your headphones.
- Question: How do I tell if my Beats Solo 3 wireless headphones are charging?
- Answer: Your Beats Solo 3 wireless headphones have a LED fuel gauge that displays their battery and charging status. You can tell if your earphones are charging by observing the indicator lights. The LED indicator will flash white when charging and remain lit when charging is complete. A red and white flash means your headphones have a charging issue.
How to Check Battery Level on Beats Headphones?
- Question: Can I replace my Beats Solo 3 battery?
- Answer: Yes. You can replace your Beats Solo 3 battery. However, the process is not a DIY task. Unless you are an experienced technician, take them to a Beats/Apple service center. The headphones have delicate parts susceptible to damage. The warranty card does not cover battery replacements, meaning you must pay a small fee.
The Beats Solo 3 has an LED fuel gauge with five indicator lights that display the headset’s battery and charging status. When the device is flashing red and white, it usually means the headphones have a charging issue. Fortunately, you can troubleshoot and fix the problem by following the steps highlighted in this guide.