The Beats X are stylish wireless neckband headphones acclaimed for their balanced sound profile and supreme comfort. These earbuds perform incredibly well in noisy surroundings and provide up to 8 hours of playtime when fully charged. Thanks to their quick charge feature, recharging the earphones doesn’t take long. You only need to boost the battery for 5 minutes to get 2 hours of playtime.
Even though the Beats X earbuds are no longer on the market, many people still rock them. After all, they are durable and provide reliable performance. The only issue is that the earphones might act up and continuously flash a red and white light to indicate they have a problem.
This guide explains why your Beats X earphone quickly flashes red and white and how to fix the issue.
Key Takeaways
- The Beats X earphones have an LED indicator light that displays their current status. Beats X flashing red and white might mean the battery has a problem.
- Outdated firmware can cause the Beats X earbuds to flash red and white. Updating the software to the latest version can help solve the issue.
- Software bugs and glitches can cause the Beats X earphones to flash a red and white light. Resetting the earphones to factory defaults can help correct minor issues.
- Beats X flashing red and white when connected to a charger might indicate the earphones are not charging. Replace the charger or power supply to fix the problem.
- Dirt, grease, and debris can block the connection between the buttons and the circuit board, causing the earphones to flash red and white. Cleaning the earbuds with a WD40 spray can solve the issue.
Why Is My Beats X Flashing Red and White?
Your Beats X earbuds have an LED indicator that displays their current status. You can tell how much listening time you have left by checking the LED light. A solid white light means the earphones have up to 8 hours of battery life, while a red light means the battery is low, with only 1 hour left before the earbuds go off.
A red flashing light indicates the battery requires a recharge. If the earphones flash a continuous red and white light, the battery probably has a problem.
Beats X flashing red and white might also mean issues with the firmware, circuit board, or charger. Software bugs can also cause the earphones to malfunction and blink a red and white light. Resetting the earbuds can help solve the problem.
How to Fix Beats X Flashing Red and White?
Reset Beats X Earphones
Beats X flashing red and white might result from software bugs or minor glitches. The quickest way to fix this problem is to reset the earphones. A reset will restore the earbuds to factory defaults and delete custom settings, allowing you to set up the earphones afresh.
Follow these steps to reset your Beats X earbuds:
- Press the power and volume down buttons simultaneously for 10 seconds.
Press the Volume Down and Power buttons for 10sec to reset your Beats X earbuds
- Maintain this position until the LED indicator flashes.
- Release the buttons and wait a few seconds before turning the earphones on.
- Your earphones are now ready for the setup process.
Resetting Beats X Earbuds
Update the Firmware
Sometimes, your Beats X earphones might flash a red and white light because of corrupt or outdated software. Updating the firmware on your Beats X wireless earphones to the latest version will ensure they work at their best. Installing the latest software on your earbuds will ensure you get the best out of them.
Fortunately, updating your Beats X wireless earphones is a breeze. If you have an iOS device, you only need to pair it with your earbuds, and it will automatically update the firmware. Ensure you have the latest iOS or iPadOS version installed on your smartphone or tablet.
If you have an Android device, you must download and install the Beats app to update your Beats X earbuds. Launch the app on your device and follow the on-screen instruction to update your earphones.
Change the Charger or Charging Cable
If your Beats X is flashing red and white while connected to the charger, the charging cable or the power supply has a problem. Check the charging cable for bends or cuts before replacing it. Try a different power cord or charger to determine if the first one has an issue.
Beats X Replacement Charging Cable
If the incoming power supply is okay, inspect the earphones. Although Beats X earbuds are durable, they are susceptible to damage when subjected to extreme conditions. If you notice any faults, you may have to take them to a repair shop for servicing.
Avoid exposing your earphones to direct sunlight or extreme heat, or cold. Instead, store them in the protective case provided.
Charge the Battery for Extended Periods
Your Beats X earphones might flash a red and white light instead of charging or powering on because of an over-discharged battery. Do not let the battery drain to 0% to avoid this problem. Lithium-ion batteries usually act up when they are low on charge, making it hard to revive them.
If you find yourself in this situation, the only possible fix is prolonged charging. Charge your Beats X earphones for at least 12 hours to get them out of the discharged state. Once fully charged, the flashing red and white light will disappear. If not, you may need to replace the battery.
Clean the Earphones
Keeping your earphones clean will ensure they serve you for years to come. Leaving them dirty can cause technical issues. Dirt, dust, and grease can block the connection between the buttons and the circuit board, causing the earphones to flash red and white to indicate a malfunction.
Even though Beats by Dre cautions users from using aerosol sprays to clean their earphones, several users say the WD40 spray is a safe alternative for cleaning your earbuds. This versatile cleaning spray can help remove dirt and dust from metal surfaces, eventually fixing the flashing red and white light issue.
- Take your Beats X outdoors in an open space.
- Press and hold the power button and spray the cleaning solvent from all sides.
- Push the button a few times to allow the spray to penetrate the earphones.
- Allow the earbuds to dry naturally for about an hour.
- Use a soft fabric to clean any dust and dirt.
- Charge the earphones for a few hours and check if this solves the issue.
Fixing Beats X Flashing Red and White with WD40
Replace the Battery
Beats X flashing red and white might mean the battery is faulty. After all, the earphones use Lithium-ion batteries. Even though these batteries can retain power for a long time, they cannot survive more than 500 charge cycles without losing their performance.
Beats X Replacement Battery
If the battery can’t hold a charge for extended periods as before, the only solution is to replace it. If you’re a DIY enthusiast with tech skills, you can open the earphones and replace the battery yourself. However, consulting a technician for professional assistance is always a good idea. Doing so will ensure you don’t void the warranty.
Replacing the Battery on Beats X Earbuds
Visit a Service Center
If you’ve tried all these steps in vain, your earphones might be defective. You can contact Beats or Apple support for further assistance. They may suggest you take the earphones to them if they are under warranty. If you don’t have valid warranty coverage, you may have to purchase new earbuds
Repairing Battery Contacts on Beats X Earbuds
Frequently Asked Questions
- Question: Why are my Beats X flashing red and white?
- Answer: Beats X flashing red and white might mean the battery is faulty or the charging circuit is defective. It might also indicate that the earphones have firmware issues or software bugs.
- Update the firmware to the latest version via the Beats app and check if this solves the problem. Resetting the earbuds can help correct minor glitches. If the battery has issues, you may need to replace it.
- Question: Why are my Beats X flashing red and white and not charging?
- Answer: Your Beats X earphones might flash a red and white light instead of charging because of an over-discharged battery. Do not let the battery drain to 0% to avoid this problem. The earphones will blink red to notify you to charge the battery. Also, check the charger or power supply to ensure it is compatible with your earbuds.
- Question: How do I fix my Beats X blinking red and white?
- Answer: You can fix your Beats X flashing red and white using several options. First, reset the earphones to factory defaults to correct minor bugs and set them up afresh. Software issues can cause your Beats X earbuds to blink red and white. Updating the firmware can help solve the problem. If these two steps don’t work, you may need to replace the battery or have the earphones serviced.
- Question: How do I reset my Beats X earphones?
- Answer: Resetting your Beats X earphones will restore them to factory defaults. It will erase custom settings and pairing information but, in the process, correct minor glitches. Press the power and volume down buttons simultaneously for 10 seconds to reset the earphones. Maintain this position until the LED indicator flashes. Release the buttons and wait a few seconds before turning the earphones on.
- Question: How do I tell when to charge my Beats X earbuds?
- Answer: Your Beats X has an LED indicator that notifies you of the earphone’s current status. You can know when to charge your earbuds by checking the LED indicator. It will blink red to indicate the battery is low and requires a recharge. A steady red light means the earphones have 1 hour of listening time left, and you need to charge the battery soon.
Conclusion
Dealing with Beats X earbuds that continuously flash red and white can be frustrating. After all, the earphones won’t function as expected until you fix this problem.
The issue might emanate from software bugs, minor glitches, damaged circuitry, or faulty batteries. Fortunately, this guide can help you troubleshoot and fix Beats X flashing red and white.
