Samsung is a world-renowned brand famous for its high-end smartphones, tablets, TVs, and other electronics. Galaxy buds are one of the many flagship products from Samsung to hit the market.
These stylish wireless Bluetooth earbuds allow you to listen to music or answer calls on any smart device. They have impressive built-in features and produce hard-hitting bass with crisp notes for an immersive audio experience.
The best part about these wireless earphones is that they are compatible with non-Samsung devices so long as they support Bluetooth technology. You can connect your Galaxy buds to your laptop for added convenience.
This guide explains how to connect Galaxy buds to your laptop for an enhanced user experience.
Key Takeaways
- Galaxy buds only function with devices approved by the Bluetooth SIG. Your laptop must support Bluetooth connectivity to work with Samsung Galaxy buds.
- Ensure you partially or fully charge your Galaxy buds before pairing and connecting them to your laptop lest you experience connectivity issues.
- Unpair your Galaxy buds from other connected devices before connecting them to your laptop. Galaxy buds cannot connect to multiple devices simultaneously.
- Some Galaxy buds do not automatically pair with laptops and TVs. You must pair them to your computer manually before establishing any connection.
Galaxy Buds
Connecting Galaxy Buds to Laptop
Even though Galaxy buds work with other non-Samsung devices, connecting them to a laptop is not as straightforward as it seems.
First, your computer must support Bluetooth connectivity to work with these wireless earphones. Then again, you must pair your earbuds with the laptop before they can connect and transfer signals.
Here are the steps to connect your Galaxy buds to computers with different operating systems:
Connecting Galaxy Buds to a Windows Laptop
- Unpair your Galaxy buds from other devices like your phone or TV.
- Turn off Bluetooth on the previously connected device.
- Place the Galaxy buds in their charging case, then close the lid and wait for 5 to 10 seconds.
- Open the charging case lid.
- Check if the power light is ON (indicates the earbuds are in pairing mode).
- If the power light is OFF, you must put the earbuds in pairing mode manually by fitting them in your ears, then pressing both touchpads until you hear a series of beeps.
How to Manually Put Galaxy Buds into Pairing Mode
- Toggle Bluetooth on your PC by clicking the Bluetooth icon on the system bar.
- Right-click the Start/Windows button on your laptop.
- Click Settings.
- Go to Devices.
- Click Bluetooth & other devices.
- Click Add Bluetooth or other devices.
- Select Bluetooth (your laptop will start searching for nearby devices).
- Select Samsung Galaxy Buds to connect them to your laptop.
How to Connect Samsung Galaxy Buds to a Windows 10 Laptop
How to Connect Samsung Galaxy Buds 2 Pro to a Windows 11 Laptop
Connecting Galaxy Buds to a Mac Laptop
- Check if your Galaxy buds have been paired with other devices and unpair them.
How to Unpair Galaxy Buds
- Turn off Bluetooth on other devices.
- Insert the Galaxy buds in their charging case, then close the lid.
- Wait for 5 to 10 seconds.
- Open the charging case lid and check if the battery light is ON.
- The battery light indicates the earbuds are in pairing mode.
- Toggle Bluetooth on your PC (click Apple menu > System Settings, then select Bluetooth in the sidebar).
- Go to the Devices list and find your Galaxy buds.
- Click Connect next to your earbuds.
- Your Galaxy buds will automatically connect to your Mac laptop.
How to Connect Galaxy Buds to a MacBook
Troubleshooting Galaxy Buds Connectivity Issues
Sometimes, you might experience challenges connecting your Galaxy buds to your laptop. Even if you previously managed to connect your Galaxy buds to your computer, it might act up and disappear from the list of connected Bluetooth devices.
Fortunately, you don’t have to panic. Here are a few tips for troubleshooting Galaxy buds connectivity issues.
Troubleshooting Galaxy Buds Pairing Issues – Quick Fixes
Unpair Previously Connected Devices
If you cannot pair your earbuds with your PC, check whether they are connected to a different device. Samsung Galaxy Buds cannot connect to multiple devices simultaneously. You must unpair them from one device before connecting them to your laptop.
Here are the steps:
- Open Bluetooth settings on your phone, tablet, or another connected device.
- Select your Galaxy buds from the list of paired devices.
- Tap or click Unpair/Forget/Delete.
- Turn off Bluetooth on the previously connected device.
- Pair your earbuds with your laptop using the steps outlined in the previous section.
Check the Battery Status
Galaxy buds might develop connectivity issues because of low battery power. They cannot pair or connect to your laptop unless you charge them appropriately.
You can confirm the battery status of your Galaxy buds by checking the power light on the charging case.
Here are the steps:
- Insert the Galaxy buds into the charging case.
- Close the lid for a few seconds.
- Open the charging case lid.
- Check the power/battery light.
- If the battery light is ON, the Galaxy buds have adequate power.
- If the light is OFF, you must recharge the earbuds for at least ten minutes to start the pairing process (Insert the buds in the charging case and close the lid to charge them)
Check Bluetooth Status
Your earbuds might develop connectivity issues because Bluetooth is disabled on your laptop. You, therefore, need to check if your computer supports Bluetooth and activate it through the quick settings menu on the taskbar or via the system settings option.
Check Compatibility
Even though Galaxy earbuds work with non-Samsung devices, some older computers or operating systems might have compatibility issues, causing the buds not to connect.
Galaxy buds only function with devices approved by the Bluetooth SIG. Check if your laptop is supported by visiting the Bluetooth Special Interest Group website.
Pair Earbuds Manually
Some Galaxy buds do not automatically pair with laptops, especially if the earbuds were previously paired to another device. You must pair them to your computer manually before establishing any connection.
Follow these steps to pair your Galaxy buds to your laptop manually:
- Fit the earbuds into your ears.
- Locate the touchpads on the sides.
- Press the touchpads simultaneously.
- Wait to hear a series of high-pitched beeps followed by a low-pitched sound.
- Release the touchpads.
- Enable Bluetooth on your laptop and follow the steps outlined above.
Frequently Asked Question
- Question: Why is my laptop not finding my Galaxy Buds?
- Answer: Your laptop might not find your Samsung Galaxy buds because of compatibility issues. Galaxy earbuds only work with devices approved by the Bluetooth SIG. If your computer is compatible, it might not find your earbuds because Bluetooth is disabled. Ensure you turn on Bluetooth on your PC before activating pairing mode on your Galaxy earbuds.
- Question: How do I put my Galaxy Buds plus in pairing mode?
- Answer: Putting Galaxy Buds plus in pairing mode is straightforward. Fit the buds in your ears, then tap and hold the touchpads simultaneously on both earbuds. The earbuds will enter pairing mode after you hear short high-pitched beeps followed by a low-pitched sound. Your Galaxy Buds plus may also enter pairing mode automatically when you open the charging case.
- Question: Can Samsung Galaxy buds connect to a PC?
- Answer: Yes. Samsung Galaxy buds can easily connect to a PC with built-in Bluetooth capability. But first, you must unpair the earbuds from other connected devices before connecting them to your computer. Place the Galaxy buds back in their charging case and wait for about 10 seconds. Open the lid of the case and wait for the power light to turn on as the buds enter pairing mode. You can now connect it to your PC by activating Bluetooth.
- Question: Do Galaxy Buds work with Windows 10?
- Answer: Galaxy Buds work with Windows 10 so long as your computer supports Bluetooth connectivity. Go to settings on your Windows computer and select devices to start the pairing process. Select Bluetooth & other devices, then click “Bluetooth and other device.” Under Add a device, choose Bluetooth to pair your Galaxy buds to your computer.
- Question: Why won’t my Galaxy Buds show up on Bluetooth?
- Answer: Your Galaxy buds might not show on your Bluetooth because they are off or undiscoverable. You must charge your Galaxy earbuds before connecting them to your Bluetooth devices. They may also fail to show on your device if they are already paired to another device. Galaxy buds do not support multipoint connections, meaning you must unpair them from other connected gadgets before pairing them with a new phone, PC, or tablet.
Conclusion
Galaxy buds are the epitome of wireless technology. These next-generation earbuds have premium features, such as noise-canceling, voice detection, and automatic volume adjustments, allowing you to immerse yourself in high-quality sound like never before. However, connecting Galaxy buds to your laptop for the first time can be an issue if you don’t know how to go about it. Use this guide to learn to pair your Galaxy buds with your computer.
