How To Pair Jabra Elite 75t? (Step-By-Step Guide)

The Jabra Elite 75t earbuds are one the most common models under the Jabra earbuds umbrella. The earbuds are convenient for everyday life, especially considering how easy they are to set up. That is why I purchased them even though I did not fully understand how to pair them to other devices.

Fortunately, a few days of using the earbuds helped me understand the important aspects when using them. This article shares all the knowledge I have acquired, especially about how to pair Jabra Elite 75t to various devices

How To Pair Jabra Elite 75t


Key Takeaways

  • Ensure the earbuds are sufficiently charged before pairing them to any device.
  • If the earbuds have been connected to another device before and the device is in range, turn off its Bluetooth.
  • Taking both earbuds out of the charging case is the first step in the pairing process. 
  • The earbuds should automatically turn on when you remove them from the case.
  • If they do not turn on, press and hold the buttons on each earbud for one second or until you see a green flashing LED
  • Then press and hold the buttons on both earbuds for three seconds and release them once you see a blue flashing LED on the right earbud.
  • The blue LED indicates that the earbuds are in pairing mode.
  • Put the earbuds in your ears, and they will guide you through the rest of the pairing process through audio prompts.
  • After pairing them to a source device, you can use only the right earbud and return the left one into the case if you wish.
  • You can also connect two devices to one pair of Jabra earbuds, but only one pair will have an active audio channel at a time.
  • If the device you connect the earbuds to asks for a PIN during the connection procedure, use 0000. 

Pairing Jabra Elite 75t Earbuds to a Source Device

Before pairing the Jabra earbuds to any device, ensure they have sufficient power. Note that a blinking red LED on either the earbuds or the case indicates a low battery or an update error. Therefore, if you observe a flashing red LED, determine what it means before continuing the pairing process.

Once you are certain the battery is at an optimal level, follow the steps below to connect your earbuds to a source device of your choice;

  • Take both earbuds out of the case. 
  • The earbuds should automatically power on, but you can still power them on manually if they do not. 
  • Press the buttons on both earbuds for one second to power them on manually. A flashing green LED indicates that the earbuds are powered on.
  • Next, press and hold the buttons on the earbuds simultaneously until you see the right earbud’s LED flashing blue. This can take between three and five seconds.
To enable pairing mode, press the buttons on both earbuds until you see blue flashing LED on the right bud

To enable pairing mode, press the buttons on both earbuds until you see blue flashing LED on the right bud

  • The earbuds are in pairing mode at this stage, and if you put them in your ears, you will hear audio prompts guiding you through the rest of the pairing procedure.
  • Search for the headphones on the device you want to connect them to. The earbuds will appear as ‘Jabra Elite 75t.’
  • If you are prompted to enter a PIN code, use the default, which is 0000. 

Once you have the earbuds in pairing mode, the next step is to finish the pairing process on the device you want the earbuds connected to.

Below are instructions on how to enable Bluetooth connectivity on various devices that can be connected to the earbuds.

Pairing Jabra Elite 75t Earbuds to an iPhone/iPad

You can enable Bluetooth connectivity on an iPhone by following the steps below;

  • Open Settings and navigate to Bluetooth.
  • Ensure the toggle switch slider is highlighted green and on the right. That indicates Bluetooth is enabled.
  • The iPhone/iPad will scan for available Bluetooth devices and list them under ‘Other devices.
  • Select the earbuds name from the list, i.e., ‘Jabra Elite 75t.’
Select Jabra Elite 75t to pair

Select Jabra Elite 75t to pair

  • If prompted to enter a PIN code, use 0000.

Pairing Jabra Elite 75t with an iPhone/iPad – Step-by-Step Instructions

Connect Jabra Elite Active 75T with iPhone - Pair Jabra Elite Active 75T with Apple iPhone

Pairing Jabra Elite 75t Earbuds to an Android Device

  • Open Settings on your phone.
  • Go to ‘Connected devices’ and select the ‘+ pair new device’ option.
  • The Android device will automatically turn on Bluetooth and begin to scan for available devices.
  • Find the Jabra Elite 75t earbuds on the list and select them.
Select Jabra Elite 75t to pair

Select Jabra Elite 75t to pair

  • If prompted to enter a PIN, use the default 0000, and your Android is connected to the Jabra earbuds. 

However, note that Android devices have different layouts, so the steps above might not apply to your device. If that is the case, consult the device’s user guide or visit the manufacturer’s website for the correct procedure for your device. 

Pairing Jabra Elite 75t with an Android Phone/Tablet

Jabra Elite 75t: How to pair | Jabra Support

Pairing Jabra Elite 75t Earbuds to Windows Device

  • Click the Windows icon (Start) on the taskbar, then select Settings.
  • On the settings window, select Bluetooth & devices > Add Devices.
  • Select Bluetooth and wait as the device scans for available Bluetooth devices that are within range.
  • Select the Jabra Elite 75t earbuds once they appear.
Jabra Elite 75t

Jabra Elite 75t

  • Follow the screen prompts as needed to complete the pairing process. If requested for a PIN, use 0000. 

You can still access the Bluetooth connection instructions on the Microsoft support page if you have an outdated Windows version. 

Pairing Jabra Elite 75t with a Windows PC

How to connect Jabra Elite 75t to Windows 10 laptop and choose audio output/input

Pairing Jabra Elite 75t Earbuds to a macOS Device

The steps below guide you on how to pair Jabra earbuds to a MacBook. 

  • Select the Apple Menu and go to System settings and select Bluetooth.
  • Place the mouse cursor on the Jabra Elite 75t option and select Connect.

Jabra Elite 75t option and select Connect

  • If prompted to enter a password, use the default, which is four zeros (0000).

More information about Bluetooth connections on a MacBook is available on the Apple website.


Frequently Asked Questions

  • Question: How do I put my Jabra 75t in pairing mode?
  • Answer: The steps below describe how to put Jabra Elite 75t earbuds in pairing mode.
  • Remove both earbuds from the case and ensure the buds are powered on.
  • If they are off, press and hold the button on each bud for at least one second. You will see a flashing green LED on the earbuds.
  • Then press and hold the buttons on both earbuds for three seconds or until you see the right earbud flash blue.
  • The earbuds are now in pairing mode.

How to Enter Pairing Mode Manually on Jabra Elite 75t Earbuds

How to Enter Pairing Mode Manually in Jabra Elite Active 75T?
  • Question: How do you reset a Jabra 75t?
  • Answer:
  • Remove the earbuds from their case and press and hold the buttons on each earbud for ten seconds.
  • You will see the earbuds flashing purple.
  • Stop pressing and close the charging case’s lid for five seconds as the earbuds reset. 
  • Next time you want to use the earbuds, you will have to re-connect them to source devices, as the reset erases all saved connection information. 

Resetting Jabra Elite 75t Earbuds – Step-by-Step Instructions

How To Reset Jabra Elite 75T, Elite Active 75T By Soundproofbros

Conclusion

The pairing procedure is fairly straightforward and should not challenge you. However, if the earbuds have a problem pairing to other devices even after multiple tries, you should check for firmware updates and reset the earbuds. Also, ensure the earbud’s battery percentage is above fifty percent.

Should the problems persist, you can access the earbud’s user manual online, and it will give you more troubleshooting tips and help you perform a factory reset and check for updates.

Was this article helpful?
YesNo

Leave a Reply