.<\/span><\/p>\nTo do this, connect the lightning end of the adapter to your iPhone, then insert the AUX cable into the other end of the adapter.<\/span><\/p>\nNext, connect the AUX cable to the speaker, then power on the speaker and play audio from the iPhone.<\/span><\/p>\nNote that newer models of JBL speakers do not have an AUX port, so the only available means of connection to the iPhone is via Bluetooth.<\/span><\/p>\n
\nFrequently Asked Questions<\/b><\/h2>\n\n
\n- <\/i> Question: Why won’t my JBL speaker pair with my iPhone?<\/b><\/li>\n<\/ul>\n<\/div>\n
\n
\n- <\/i> Answer: <\/b>Various aspects can prevent the speaker and iPhone from pairing. Below are some of these aspects and their possible solutions.<\/span><\/li>\n
- <\/i> If the speaker does not have an adequate charge or the battery is low, chances are, you will have problems with the pairing process. Therefore, ensure that the phone and speaker are fully charged.<\/span><\/li>\n
- <\/i> If the speaker and iPhone are far apart, the phone will have trouble reading the speaker’s Bluetooth signal. Therefore, bring them closer and try pairing them again.<\/span><\/li>\n
- <\/i> If you have other Bluetooth devices also actively broadcasting their Bluetooth signal, signal interference will also affect the pairing process. Thus, consider disabling Bluetooth on all other devices.<\/span><\/li>\n
- <\/i> A system malfunction could also be affecting the pairing process. Therefore, consider restarting the speaker, and if it still will not pair, reset the speaker. Then disable and enable Bluetooth on the iPhone.<\/span><\/li>\n
- <\/i> The speaker could also be paired with another device in the home. Check the LEDs on the speaker and use the manual as a reference to understand what the LED should look like when the speaker is in pairing mode. <\/span>The LED usually flashes Blue when the speaker is in pairing mode<\/b>.<\/span><\/li>\n<\/ul>\n<\/div>\n
\n
\n- <\/i> Question: How do I pair my JBL Bluetooth speaker?<\/b><\/li>\n<\/ul>\n<\/div>\n
\n
\n- <\/i> Answer:<\/b> To pair your JBL Bluetooth speaker to a source device <\/span>get the speaker in pairing mode first<\/b>. When you power on the speaker for the first time or after a factory reset, it automatically goes into pairing mode.<\/span><\/li>\n
- <\/i> However, you can <\/span>manually get the speaker in pairing mode by pressing the Bluetooth button for two to three seconds<\/b>, and the LED will start flashing.<\/span><\/li>\n
- <\/i> Next, enable Bluetooth connectivity on the source device, search for the JBL speaker, and complete the pairing process.<\/span><\/li>\n<\/ul>\n<\/div>\n
\n
\n- <\/i> Question: How do I turn on pairing mode on a JBL speaker?<\/b><\/li>\n<\/ul>\n<\/div>\n
\n
\n- <\/i> Answer:<\/b> The first time you power on the JBL speaker after purchasing or resetting it, it automatically goes into pairing mode.<\/span><\/li>\n
- <\/i> However, you can manually enable pairing mode by pressing the Bluetooth button for two to three seconds.<\/span><\/li>\n<\/ul>\n<\/div>\n