Skullcandy Sesh Evo Case Not Charging (Quick Fixes)

I never knew I could buy wireless earbuds for less than 100 bucks until I came across the Skullcandy Sesh Evo earbuds. These true wireless earbuds are budget-friendly and deliver a vibrant audio performance. Besides, they are waterproof and dust-resistant like their premium counterparts. The best part is that they come with a charging case included in the package.

However, my joy was short-lived after a few months when my Skullcandy Sesh Evo case stopped charging. As you know, you cannot boost your Skullcandy Sesh Evo earbuds without the charging case. They don’t have a separate USB port for charging.

It seems a common issue if online reviews are anything to consider. Lucky for me, I’ve discovered how to troubleshoot the issue. Anyone stuck with a Skullcandy Sesh Evo case not charging can use these tips to fix the problem.

Skullcandy Sesh Evo Case Not Charging


Key Takeaways

  • You can charge your Skullcandy Sesh Evo case separately with or without the earbuds. You can check the case’s battery status by opening the lid and checking the LEDs on the front panel before charging. 
  • A Skullcandy Sesh Evo case not charging might result from a defective USB cable. Swap the charging cable with a functioning replacement to fix the issue.
  • The Skullcandy Sesh Evo case uses a USB-C cable for charging. Connecting an incompatible cable can cause charging issues.
  • Your Skullcandy Sesh Evo case might not charge because of a faulty power source. Confirm that the connected wall outlet, PC USB port, or power bank works, and use a different source if necessary.
  • If your Skullcandy Sesh Evo case is faulty or damaged, it won’t charge. The only practical option is to purchase a new charging case from Skullcandy or a credible vendor.

Recommended Reading :

How to Charge Skullcandy Sesh Evo Case

Sometimes, your Skullcandy Sesh Evo case won’t charge because you’re doing it incorrectly. I had the same problem when I first bought my Skullcandy wireless earbuds. 

Fortunately, you don’t have to go through the same. Here is what you need to do

  • Open the charging case lid and check the LEDs to confirm the battery status.
4 LEDs on the front indicate your case’s battery status – each LED represents 25%.

4 LEDs on the front indicate your case’s battery status – each LED represents 25%.

  • Insert your wireless earbuds into the corresponding slots.
Each earbud will only fit its corresponding slot. You have L/R labels on the earbuds and on the case.

Each earbud will only fit its corresponding slot. You have L/R labels on the earbuds and on the case.

  • Close the charging case lid.
  • Locate the charging port at the back of the charging case.
There’s a USB-C charging port on the back of the charging case.

There’s a USB-C charging port on the back of the charging case.

  • Plug the provided USB-C cable into the charging port.
If possible, use the provided USB-C charging cable to charge the case.

If possible, use the provided USB-C charging cable to charge the case.

  • Connect the other end (USB-A) of the cable to a power source.
  • Check the LEDs on the charging case (they should blink while charging).

Why Is My Skullcandy Sesh Evo Case Not Charging?

You can’t recharge your earbuds if your Skullcandy Sesh Evo case is not charging. Knowing why your charging case won’t charge can help fix the problem

Here are the main reasons your Skullcandy Sesh Evo case is not charging:

Defective Charging Cable

You will receive a USB-C cable with your purchase for charging the Skullcandy Sesh Evo case. However, charging cables are often prone to damage from normal wear and tear. They might stop working unexpectedly after some time. 

If the charging cable is defective, it will not supply adequate power for charging your Skullcandy charging case. You can test if the charging cable works by connecting it to a different device. If you notice a malfunction, switch the USB cable with a functioning replacement.

If the charging cable used to charge the case is damaged, the case will not charge (image credit - Reddit)

If the charging cable used to charge the case is damaged, the case will not charge (image credit – Reddit)

Incompatible Charging Cable

USB charging cables look almost similar in size and shape. Connecting an incompatible charging cable to your Skullcandy Sesh Evo case can cause charging issues

Fortunately, solving this issue is straightforward. Always use the provided supplies to charge your Skullcandy charging case. Ensure it is a USB-C cable before plugging it into the case’s charging port. Most importantly, plug the cable firmly to prevent loose connections.

Note: The case may refuse to charge if you are using a USB-C to USB-C cable. Use a USB-C to USB-A cable to charge it.
Skullcandy Sesh Evo charging case can be picky when it comes to third-party charging cables – use the original USB-C charging cable if possible.

Skullcandy Sesh Evo charging case can be picky when it comes to third-party charging cables – use the original USB-C charging cable if possible.

Incorrect Power Rating

The Skullcandy Sesh Evo case requires adequate power to charge. The recommended power rating should not be less than 5V/3.6A. The battery rating is 3.7V/500mAh.

If your charger has a lower power rating, your Skullcandy charging case might experience charging issues. The quickest way to solve this issue is to connect the charging case to a power source with the recommended power output.

Note: In theory, chargers with lower power ratings should work with your Sesh Evo case. The only problem is – charging might take longer than usual. However, as I said, the Sesh Evo case can be picky when it comes to third-party equipment.

Faulty Power Source

Whether connected to a PC or a wall outlet, the power source matters when charging your Skullcandy Sesh Evo case. If the external power outlet is faulty, your Sesh Evo case won’t charge.

DO NOT use damaged or faulty wall outlets to charge your Sesh Evo charging case.

DO NOT use damaged or faulty wall outlets to charge your Sesh Evo charging case.

Check the wall outlet for defects to determine if it works. You can test your power supply by connecting a device such as a phone. If the connection is faulty, switch to a different source.

Over-Discharged Battery

Your Skullcandy Sesh Evo case is like a power bank. It has a rechargeable battery that requires frequent charging to store enough power. If not, the battery will lose charge gradually until it becomes flat. You cannot recharge your Sesh Evo case if the battery is over-discharged.

Fortunately, you can fix this issue quickly. Connect the charging case to a charger and let it charge for a few minutes. Sometimes, it can take minutes or even hours before the Skullcandy Sesh Evo begins to charge. Some people prefer to leave the case connected to a charge overnight to deal with discharge issues.

If the case’s battery is over-discharged, you may have to leave the case charging overnight to make it charge.

If the case’s battery is over-discharged, you may have to leave the case charging overnight to make it charge.

Battery Failure

Although rare, your Skullcandy Sesh Evo case might not charge because of battery failure. The built-in battery has a limited lifespan of about 500 charge cycles. After several charge cycles, the charging case might lose its ability to store power. As such, you may have to replace the battery or purchase a new charging case. Contact a professional technician for assistance with replacing the battery.

Note: The exact power ratings of the charging case’s battery are: 3.7V/500mAh/1.85Wh.
Sesh Evo Charging Case Battery (Image Credit – Sesh Evo FCC report)

Sesh Evo Charging Case Battery (Image Credit – Sesh Evo FCC report)

Clogged Charging Port

While the Skullcandy Sesh Evo case and earbuds are dirt-resistant, the charging port is not. Dirt, dust, debris, and other sediments might clog the charging port, causing your Sesh Evo case not to charge.

The most practical solution to this problem is to unclog the port. Use a blower to clear dust or a toothpick to dislodge stubborn debris. Take a cautious approach when cleaning the charging port since it has delicate pins. Any broken connectors can cause irreversible damage, forcing you to replace the charging port.

Wet Charging Port

Water and electricity are incompatible companions. Your Skullcandy Sesh Evo case will not charge if the charging port is wet. Moreover, charging a wet case can cause electric shock or even damage the circuit board. 

The best solution is to leave the charging case to dry naturally away from direct sunlight. Alternatively, use a blow dryer to dry the wet charging port and leave it to dry before connecting your charger.

Your case will not charge if it’s wet or if the charging port is wet.

Your case will not charge if it’s wet or if the charging port is wet.

Close Charging Case Lid

You can charge your Skullcandy Sesh Evo case with the lid closed or open. However, keeping the cover open can sometimes cause charging issues. In any case, the charging case consumes more power when the lid is open. Consider keeping it closed to boost charging times and avoid any problems.

If you cannot close the lid properly, check the charging case for debris and sediments. They might interfere with the locking mechanism, leading to charging issues. Clean the charging case with a soft fabric to remove dirt, dust, and debris. If charging the case with your earbuds, ensure they are correctly in the corresponding slots and not blocking the lid.

Damaged Charging Case

If you are still stuck with your Skullcandy Sesh Evo case not charging, the charging case might be defective. While your Sesh Evo case protects your earbuds from damage, it requires proper care and maintenance. 

Bumps, improper storage, and extreme force can damage it, causing it to stop charging. Manufacturing defects can also cause the charging case not to recharge. The only way to solve this issue is to replace the charging case. If you have a valid warranty, you can file a claim for a replacement. However, this option is only applicable to manufacturing defects.


Frequently Asked Questions

  • Question: What do I do if my Skullcandy Sesh Evo case is not charging?
  • Answer: First, determine why your Skullcandy Sesh Evo case is not charging. The charging case might not charge because of a defective or incompatible USB cable, a faulty power source, hardware failure, an over-discharged battery, or a clogged/dirty charging port. Replace the USB cable with one that works and is compatible with the charging case. Connect the charger for a few minutes to boost the charging case battery. If the charging case is faulty, replace it with a new one.
  • Question: Is there a way to know if my Sesh Evo charging case is charging?
  • Answer: You can know if your Skullcandy Sesh Evo case is charging via the LEDs on the front panel. The charging case has indicator lights that blink when charging and turn solid when the battery level is 100%.
  • Question: Will my Skullcandy Sesh Evo case charge if the lid is open?
  • Answer: Yes. Your Skullcandy Sesh Evo can charge with the lid open. However, it consumes more power when you uncover the charging case. Consider closing the charging case lid for faster charging rates and to avoid charging issues.
  • Question: What cable do I use to charge my Skullcandy Sesh Evo case?
  • Answer: The Skullcandy Sesh Evo case uses a USB-C charging cable. Connecting an incompatible cable can cause charging problems. Use the provided cable to avoid issues. Ensure the USB charging cable is firmly in place in the correct port to prevent loose connections.
  • Question: Can I charge my earbuds without my Skullcandy Sesh Evo case?
  • Answer: No. You cannot charge your Skullcandy Sesh Evo earbuds without the charging case. The earbuds do not have a separate port for charging. They can only recharge while in the charging case.

Take Away 

You can’t charge your earbuds if your Skullcandy Sesh Evo case is not charging. I’ve experienced the same issue multiple times. The problem might originate from your charger, cable, or the charging case. 

In most cases, fixing the issue should not be cause for concern. Replace the charger or the charging cable and see if it works. If not, clean the charging case port to solve the problem. By following this guide, you will be able to troubleshoot and fix your Skullcandy Sesh Evo case and continue enjoying quality sounds.

Was this article helpful?
YesNo

Leave a Reply