True wireless earbuds can be pricey. However, this is not the case with Skullcandy Sesh Evo earbuds. These earphones are among the most affordable you can get in the market. They are also renowned for their sleek design, impressive sound quality, and long battery life.
Like all wireless earphones, Skullcandy Sesh Evo earbuds come with a charging case. You only need to place your earbuds in the case to boost the battery.
The cases charge independently, with or without the earbuds. You can check how much battery life is left by opening the lid and checking the LEDs on the front. Each LED represents 25% of battery life. However, the lights on the case might not always turn on, leaving you frustrated.
So in this guide, I will try to answer why your Skullcandy Sesh Evo case won’t turn on and how to fix the problem.
Key Takeaways
- Your Skullcandy Sesh Evo case might not turn on because of a low charge. Plug the provided USB-C cable into the charging port to recharge the case.
- Pairing issues can cause your Skullcandy Sesh Evo case to malfunction. Resetting the earbuds can help resolve the problem.
- Your Skullcandy Sesh Evo case might not turn on because of a malfunctioning battery. Consider replacing the damaged battery or charging case to fix the issue.
- Manufacturing defects can lead to charging case problems. Visit the Skullcandy warranty page to file a claim for a replacement.
- Dirt, dust, and debris can interfere with the case’s opening and closing mechanism, causing the Skullcandy Sesh Evo case not to turn on. Clean the charging case with a soft fabric to restore its functionality.
- Hardware failure can cause your Skullcandy Sesh Evo case not to turn on. Check the charging case for visible damage to troubleshoot the problem.
Recommended Reading :
How to Turn On a Skullcandy Sesh Evo Case
You’ll have to turn on your Skullcandy Sesh Evo charging case to recharge your earbuds. Fortunately, the process is almost automatic. You only need to open the charging case lid to turn it on.
The LED lights on the charging case will blink continuously, depending on the battery level. Ensure the charging case has adequate charge to turn on. Connect a charger for a few minutes to recharge the case before turning it on.
Why Is My Skullcandy Sesh Evo Case Not Turning On?
Skullcandy Sesh Evo case not turning on can be frustrating. In any case, you can’t charge your earbuds with a malfunctioning case. Understanding the reasons behind this problem can help you troubleshoot and fix your charging case. Here are possible reasons your Skullcandy Sesh Evo case won’t turn on.
Low Charge
The Skullcandy Sesh Evo charging case has a built-in rechargeable battery. The case stores power, which you can use to recharge your wireless earbuds. When you open the case lid, the LEDs will turn on.
LEDs on the front side of the case indicate the battery level. Each LED represents 25%.
However, the battery level drops gradually, meaning you must recharge the charging case to maintain its charge. Your Skullcandy Sesh Evo case might not turn on if the battery is too low.
You can check the battery status through the LED lights on the front of the case. The Skullcandy Sesh Evo case has four LED lights, each representing 25% of the current battery level.
If the charge is low, close the lid, plug in the provided USB cable, and connect it to a compatible charger, PC, power bank, or 12V car adapter. The LEDs will blink continuously for 2 hours until the case reaches 100% charge.
Make sure the charging case is fully charged – if the battery is low, the case will not turn on.
Pairing Issues
Pairing issues can sometimes cause your charging case to develop glitches and not turn on.
The good news is that a simple reset can help restore your charging case’s functionality. You only need to reset the earbuds to factory defaults and initiate the pairing process afresh. This strategy will erase all pairing information and correct glitches that might cause your charging case not to turn on.
Here’s how to reset your Skullcandy Sesh Evo earbuds:
- Remove your earbuds from your device’s Bluetooth settings (delete them from paired devices).
Forget Sesh Evo from the list of paired devices.
- Press both earbuds for 4 seconds to turn them off.
- Press each earbud for 10 seconds to restore them to factory defaults.
While the earbuds are off, press both buttons for 10 seconds to reset them.
- The LEDs will flash blue and then red.
- Open the charging case lid.
- Place the earbuds in the charging case.
- Remove the earbuds from the charging case when the LEDs turn red.
Wait for the earbuds’ LEDs to turn red, and then take the earbuds out.
- The buds will automatically power on, and the LEDs will flash blue as they sync. Then, only the left earbud will start flashing red and blue, indicating the earbuds are in pairing mode.
- Check the charging case LEDs to see if the case powers on.
How to Reset Sesh Evo Earbuds
Battery Failure
As stated, the Skullcandy Sesh Evo case has a built-in rechargeable battery. However, lithium-ion batteries do not exceed 500 charge cycles.
This means the battery cells might lose their capacity to hold adequate charge to turn on the charging case after using them for an extended period.
The only way to solve this issue is to replace the battery or purchase a replacement charging case. Installing a new battery can be problematic if you don’t have the expertise to repair the charging case. As such, consider enlisting a professional to help you fix the problem.
Your Sesh Evo case uses a Lithium-Ion rechargeable battery with the following rating: 500mAh, 3.7V, 1.85Wh.
Manufacturing Defects
The Skullcandy Sesh Evo case is not perfect. The charging case might have manufacturing defects, causing it not to turn on. Fortunately, Skullcandy products have a one-year warranty.
If the problem is repairable and your warranty is still valid, you can fix it for free or get a replacement. Visit the Skullcandy warranty page to file a claim for a replacement. Skullcandy will gladly replace your charging case if it has a manufacturing defect.
Dirt & Debris
The Skullcandy Sesh Evo case has a lid that opens and closes swiftly. When you open the cover, the charging case should turn on automatically. However, dirt, dust, and debris might interfere with the opening/closing mechanism, causing the charging case not to turn on. The quickest way to fix this problem is to clean the case with a soft fabric.
Use a piece of cloth or cotton swab to clean the case. You can also use a sharp pin or toothpick to dislodge debris and sediments, preventing the charging case from opening and closing correctly.
Clean the Sesh Evo charging case with a lint-free cloth and alcohol. You could also try using cotton swabs for hard-to-reach spots, or even a toothbrush.
Hardware Failure
While the Skullcandy Sesh Evo case protects your earbuds from bumps and extreme temperatures, it is susceptible to damage. After all, the case comprises plastic materials, making it prone to normal wear and tear. If your charging case cannot turn on, check it for visible damage.
Depending on the severity of the damage, you may have to replace the charging case. Since the Skullcandy warranty only covers manufacturing defects, buying a new charging case is the only option for hardware failure caused by user damage.
Frequently Asked Questions
- Question: Why is my Skullcandy Sesh Evo case not working?
- Answer: Your Skullcandy Sesh Evo case might not work for several reasons. It might have a manufacturing defect or an over-discharged battery. In some cases, the battery might be old and past its best working years, causing the charging case to malfunction. The charging case might also stop working because of software glitches or pairing issues.
- Question: How do I reset my Skullcandy Sesh Evo case that won’t turn on?
- Answer: The Skullcandy Sesh Evo case does not have a reset button. The only way to restore it to factory defaults is to reset your Skullcandy earbuds. Unpair the earbuds from your device and press the touch sensors for 4 seconds to turn them off. Press the earbuds for an additional 10 seconds to reset them. They will flash blue and then red. Finally, put them in the charging case to begin the pairing process afresh.
- Question: How do I know if my Skullcandy Sesh Evo case is on?
- Answer: Your Skullcandy Sesh Evo case has four LED lights that display its current battery status. When you open the case lid, the LEDs will light up, meaning the charging case is on. If the LEDs do not glow, you may have to recharge the case for a few minutes.
- Question: What does the button on the Skullcandy Sesh Evo case do?
- Answer: The button on the Skullcandy is for knowing the battery status and activating the TILE function. When pressed, the four LEDs next to it will glow depending on the battery level. You also need to press the button when activating the TILE function on the TILE app. This feature lets you locate misplaced earbuds.
- Question: How do I know if the Skullcandy Sesh Evo case is charging?
- Answer: You can tell if your Skullcandy Sesh Evo case is charging through the four LEDs on the front panel. When connected to a charger, the LEDs will blink continuously and turn solid when the charging case reaches 100% charge.
Conclusion
The Skullcandy Sesh Evo is an excellent choice for tech enthusiasts searching for budget-friendly earbuds. But, like all electronics, they are not exempt from malfunctions.
The Skullcandy Sesh Evo case might not turn on when you want to recharge your earbuds, leaving you upset. Fortunately, this guide can help you troubleshoot and fix the problem quickly.
