Jabra might not be as recognizable as other big-name brands, but the company’s headphones and earbuds match the quality and performance of their rivals. Moreover, they are cheaper and produce exceptional sound on a budget.
The Jabra Elite 3 and Elite 7 Pro are among the best earbuds from Jabra’s lineup. These earbud options are well-known for their audio clarity and punchy bass. Besides, they have noise isolation and canceling features, keeping unwanted background noise at bay.
You’ll never go wrong with a Jabra Elite 3 or Elite 7 Pro. However, these earbuds can sometimes act up, leaving you stranded. Learning how to reset your Jabra Elite 3 & Elite 7 Pro can help restore their functionality. Here’s how to go about it.
Key Takeaways
- As with all earbuds, your Jabra Elite 3 and Elite 7 Pro might develop bugs and glitches. A reset can help correct common problems.
- Your Jabra Elite 3 or Elite 7 Pro might require a reset to solve pairing issues, stuttering sound, audio lags, synchronization problems, firmware glitches, and charging problems.
- A reset restores your Jabra Elite 3 & Elite 7 to factory defaults. It erases all saved custom settings and pairing information.
- Since a reset erases all saved configurations, you must re-pair the earbuds with your mobile device. Remember to forget the pairing info from your mobile device before the reset.
- You cannot reset one Jabra Elite 3 or Elite 7 Pro earbud. You must reset both earbuds to factory settings to correct minor bugs and glitches.
- If you reset only one Jabra earbud, the LED indicators will keep flashing pink or magenta until you reset the other earbud.
Recommended Reading :
Why Reset Jabra Elite 3 & Elite 7 Pro?
The Jabra Elite 3 & Elite 7 Pro are high-quality budget earbuds. They perform remarkably well, matching the performance of their high-end rivals.
However, no earbuds are perfect. Your Jabra Elite 3 & Elite 7 Pro might develop bugs and glitches. Your earbuds might disconnect from each other, stop charging, produce stuttering sounds, or decline to connect to your devices. Fortunately, you can resolve these issues by resetting the earbuds to factory defaults.
Here are some of the issues resetting your Jabra Elite 3 & Elite 7 Pro might solve:
- Charging problems
- Pairing issues
- Audio lags
- Stuttering sounds
- Synchronization issues
- Power failure
- Firmware or software issues
- Noise isolation and cancellation failure
Reset can help with all kinds of earbud issues
How to Reset Jabra Elite 3?
Resetting Jabra Elite 3 & Elite 7 Pro earbuds can be challenging if you don’t know what to do. You may have to attempt the reset several times to get it right.
That said, ensure your earbuds have sufficient charge before the reset to avoid repeating the same process several times. You must reset both earbuds, or the LEDs will continue flashing until you reset the other earbud.
Follow these steps to reset your Jabra Elite 3 earbuds:
- Forget your Jabra Elite 3 from your mobile device.
Forget Jabra Elite 3 from your device to avoid pairing issues after resetting the earbuds.
- Open the charging case.
- Insert the earbuds into their corresponding slots in the charging case.
- Leave the charging case lid open.
- Press and hold the Right and Left touch controls on the earbuds simultaneously.
While the buds are inside the case, in their respective slots, press the touch controls on both buds simultaneously.
- Keep holding down the buttons for 10 seconds.
- Release the buttons when the LEDs flash pink.
When the earbuds start flashing pink, your Jabra Elite 3 are reset.
- If the reset is successful, the LEDs will stop flashing pink.
Resetting Jabra Elite 3
How to Reset Jabra Elite 7 Pro?
Follow these steps to reset your Jabra Elite 7 Pro earbuds:
- Forget your Jabra Elite 7 Pro from your mobile device.
- Open the charging case.
- Insert the earbuds into their corresponding slots in the charging case.
Put the earbuds in their respective slots without closing the case lid.
- Leave the charging case lid open.
- Press and hold the Right and Left touch controls on the earbuds at once.
- Keep holding down the buttons for 10 seconds.
- Release the buttons when the LEDs flash magenta.
Press and hold the touch controls on both buds simultaneously until they start flashing magenta.
- Close the charging case lid for about 5 seconds to complete the reset process.
- Open the lid to check the earbuds.
- If the reset is successful, the LEDs will stop flashing magenta.
Resetting Jabra Elite 7 Pro
How to Reset the Jabra Elite 7 Pro Charging Case?
Sometimes resetting your Jabra earbuds is not enough to fix prevailing issues. You may also have to reset the charging case to complete the reset. However, this process only applies to the Jabra Elite 7 Pro earbuds, not Jabra Elite 3.
Here are the steps:
- Open the Jabra charging case.
- Leave the charging case lid open.
- Connect the charging case to your PC or AC adapter via the supplied USB cable.
- Let the charging case charge for a while.
- The charging case firmware will restart.
- Unplug when the charging case LED lights up.
Frequently Asked Questions
- Question: Does the Jabra Elite 3 have a reset button?
- Answer: As with most earbuds, the Jabra Elite 3 and Elite 7 Pro do not have a reset button. You must manually reset them by pressing and holding the touch controls simultaneously for a specified period. Follow the steps outlined in this guide to reset your Jabra Elite 3 earbuds.
- Question: Why Does my Jabra Elite 3 flash pink after resetting?
- Answer: Your Jabra Elite 3 earbuds might keep flashing pink because the reset was unsuccessful. Restoring the earbuds to factory defaults has various stipulations. First, you must ensure the earbuds have sufficient charge before the reset. Then again, you cannot reset one Jabra Elite 3 earbud. You must reset both earbuds to factory settings to stop the LEDs from flashing pink. You must also forget the earbuds from your mobile device to reset them successfully.
- Question: How do I reset the Jabra Elite 7 to factory settings?
- Answer: Resetting your Jabra Elite 7 to factory settings is easy. Forget your Jabra Elite 7 Pro from your mobile device. Open the charging case and place the earbuds in their corresponding slots. With the charging case lid open, press and hold the Right and Left touch controls on the earbuds at once for 10 seconds. Release the buttons when the LEDs flash magenta. Close the charging case lid for 5 seconds to complete the reset process. If successful, the LEDs will stop flashing magenta.
- Question: How do I re-pair my Jabra earbuds after resetting?
- Answer: Resetting your Jabra earbuds erases custom settings and pairing information. You must reconnect your earbuds to your devices. Enable Bluetooth on your mobile device and remove the earbuds from the charging case to turn them on. The LEDs on the earbuds will turn green. Press the touch controls on the earbuds for 3 seconds to put them in pairing mode. Go to the Bluetooth menu on your device and tap Jabra Elite earbuds to pair with your device. If prompted, enter 0000 as the passkey.
Pairing Jabra Elite 3 – Step-by-Step Guide
Pairing Jabra Elite 7 Pro
- Question: How long does the Jabra Elite 7 Pro take to reset?
- Answer: The time it takes to reset your Jabra Elite 7 Pro depends on how fast you are with your fingers. Nevertheless, the entire reset process should take approximately 15 seconds to complete. You’ll have to press the earbuds for 10 seconds while in the charging case and close the lid for 5 seconds to complete the reset.
Conclusion
Jabra Elite earbuds are quickly becoming popular because of their premium features and easy-to-use settings. While they might be prone to bugs and glitches, a simple reset can help resolve any issues. Follow this guide to reset Jabra Elite 3 and Elite 7 Pro.
